Filter
Top Products
D-2 November 1996 A-62032
2. Remove the (4) paper guides by lifting them straight up. Clean
the outside of housing with a soft cloth.
4. Reinstall the four paper guides. Insert the image transfer/paper
separator charger onto the guides of the suction unit until the
charger is locked by the front edge of the guides. Lift up the
vacuum unit release lever (M2) and lock it into the EP unit.
Close the front cover.
NOTE: Be sure the charger is installed correctly. If the vacuum
unit will not lock into place or if there are printing
problems, reinstall the charger.
3. Carefully clean the wires using the cleaning pen contained in
the accessories for the machine as in the illustration.