Filter
Top Products
A-61662 October 2011 6-1
6 Maintenance
Contents Maintenance schedule ................................................................... 6-2
Cleaning supplies............................................................................ 6-2
Cleaning procedures....................................................................... 6-3
Cleaning the feed rollers............................................................. 6-4
Cleaning the optics..................................................................... 6-7
Cleaning the transport .............................................................. 6-11
Replacement procedures..............................................................6-12
Replacing tires.......................................................................... 6-12
Replacing the pre-separation pad ............................................6-13
Replacing the imaging guides ..................................................6-13
Lamps (LEDs)........................................................................... 6-13
Camera calibration........................................................................ 6-14
Supplies and consumables...........................................................6-16
Performing routine maintenance will ensure optimal image quality and
prolong the life of your scanner.
The Maintenance monitor on the Home screen of the Ngenuity
Operator Utility (NOU) provides reminders as to when scanner
maintenance is required.
Based on the intervals set, the Maintenance LED on the control panel
will also blink. To turn the Maintenance LED off and to reset the interval
count for future reminders, click on the link to the right of the expired
maintenance item after each maintenance procedure is completed.