B-16 A-61662 October 2011
Patch Code options Imprint Patch Code Sheets — enable this option if you want to print
on patch code sheets and count them with the index counter. This
setting only applies to patch types 1, 2, 3, 5, and 6. Patch types 4, 7, 8
and 9 will not get printed or counted even with this checkbox selected.
The Increment on Patch Code and Reset on Patch Code options are
only for the Kodak Ngenuity 9150 Scanner.
Set these options if you
want to use patch sheets within a batch to control printer index values.
A set of patch codes can be found on the Installation CD or on the
website at www.kodak.com/go/scanners; under Support>User
Manuals.
Increment on Patch Code
Enable — select this checkbox to increment the index count value
when the specified patch code is detected instead of incrementing the
index count on each page.
Patch Code: select the Patch Code Type that will increment the index
counter when Increment on Patch is enabled.
Reset on Patch Code
Enable — select this checkbox to reset the index count value to the
Reset Count value when the specified patch code is detected.
Reset Count: the index count value that takes effect when the Reset
Patch Code is detected when Reset on Patch is enabled.
Patch Code: select the Patch Code Type that will reset the index
counter when Reset on Patch Code is enabled.
Changes to the index count value due to Increment on Patch and Reset
on Patch will take effect regardless of whether Imprint Patch Code
Sheets is selected. For more information and samples of Patch Codes,
see Appendix E, Patch Code Information.