Filter
Top Products
Troubleshooting
www.kodak.com/go/support
33
Print is too
light or under-
exposed
IMPORTANT:
Use only Kodak color cartridge & paper kits (with
symbol) for your printer dock. Do not use inkjet paper.
■ Load the paper with the Kodak logo facing down. Reload the paper, if
necessary (page 5).
■ Turn the flash off, then take the picture. See your camera user’s guide for
details.
■ Adjust the exposure compensation on the camera, then take the picture.
See your camera user’s guide for details.
■ Move so the distance between you and the subject is within the effective
flash range, then take the picture. See your camera user’s guide for
details.
■ Edit the picture using Kodak EasyShare software on your computer. See
the EasyShare software Help for details.
Print is too dark,
overexposed, or
discolored
■ Reposition the camera for more available light, then take the picture. See
your camera user’s guide for details.
■ Use fill flash or change your position so light is not behind the subject,
then take the picture. See your camera user’s guide for details.
■ Turn the flash on, then take the picture. See your camera user’s guide for
details.
■ Adjust the exposure compensation on your camera, then take the
picture. See your camera user’s guide for details.
■ Move so the distance between you and the subject is within the effective
flash range, then take the picture. See your camera user’s guide for
details.
■ Edit the picture using Kodak EasyShare software on your computer. See
the EasyShare software Help for details.
■ Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
■ Do not block the cooling vents on your printer dock; keep them clean
(page 1).
If... Try the following