Kodak G610 Printer User Manual


 
Troubleshooting
www.kodak.com/go/support
39
Still having problems?
Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your
camera manufacturer.
Transfer light
Light status Cause Action/solution
Light glows green Printer dock ready for
transferring pictures.
None required.
Light blinks green Pictures transferred to the
computer.
None required.
After transferring pictures, the transfer
light continues to blink green until
either the camera is removed, the
Transfer button is pressed again, or the
connection is no longer available.
Light is off No pictures in camera or on
memory card.
None required.
Camera not docked. To enable Transfer:
1 Connect printer dock to computer
(page 19).
2 Take pictures.
3 Dock the camera.
Printer dock not connected to
computer.
Camera not properly seated on
connector.
Reseat the camera on the printer dock
(page 7).
Computer off. Turn on the computer.