Filter
Top Products
C-18 A-61167 September 2002
The resolution of the character fonts is 96 dpi across the width of the scanner.
However, the font resolution varies with the direction that the paper is fed into
the scanner. This variable allows the creation of an easy-to-read character
string. The approximate resolution of the printed output is shown below.
Changes to the print string, other than automatic, sequential number
advances, require a host command to restart the imprinter. You must
initiate a change between documents or batches. Changes cannot be done
automatically or between documents “on the fly.”
NOTE: The minimum document width for using the imprinter is
14 cm (5.5 in.).
Imprinter
Specifications
Maximum lines 1
Print locations (horizontal) 14, manually set
Print locations (vertical) Set by host
Print orientation Cine or Comic
Font size Large or Small
Ink cartridge HP51604A or compatible
Print side Rear (post-scan)
Minimum imprinting distance 0.89 cm (0.35 in.)
from document edge
Static fields available User-specified via host
Dynamic fields available Up to nine-digit sequential document
number, date, four-digit time
Languages supported Any phonetic language (for example,
Danish, Dutch, English, Finnish, French,
German, Italian, Norwegian, Portuguese,
Spanish, Swedish)
Resolution (dpi)
Small Large
Cine 85 dpi 63 dpi
Comic 115 dpi 85dpi