Filter
Top Products
D-6 A-61167 September 2002
Removing the
Dockable Flatbed
The flatbed is easy to remove from your i200 Series Scanner.
IMPORTANT: Do not attempt to undock the flatbed while it is in use.
1. Power down the scanner.
2. Raise the input tray and rest it against the scanner.
3. Squeeze the latches on the lower sides of the flatbed.
The docking latches disengage from the scanner.
4. Pull the flatbed away from the scanner.
5. Remove the scanner front panel from its storage place on the back of
the flatbed.
6. Place the flatbed in its original packaging for storage.
Latches