Filter
Top Products
Matchprint Professional Server Network Guide for Windows 2000
2003 Kodak Polychrome Graphics. All rights reserved. Page 12 of 23
2. Click on the Advanced tab to see how this NIC is configured.
Figure 12
Figure 12 shows a simplified list of Network Parameters and Current Values. This is a similar
but short list than in Figure 9. The default settings are pictured above.
3. To test the NIC, select the Diagnostics tab:
Figure 13
Warning: The Loopback box is checked by default. If you are connected to the network with an
Ethernet cable, you must un-check the Loopback box before selecting Run Tests or
you may hang the computer. If you want to run the Loopback test, remove the Ethernet
cable from the back of the MPS DFE.
4. Un-check the Loopback box and then click on the Run Tests button, click the Yes button and tests
will commence. Results of the Run Tests diagnostics will be displayed in the Pass/Fail column of
the Diagnostics window.