Filter
Top Products
Matchprint Professional Server Network Guide for Windows 2000
2003 Kodak Polychrome Graphics. All rights reserved. Page 4 of 23
Introduction
This document is intended only to identify the initial configuration of the Matchprint Professional Server
digital front end (DFE) as shipped from the factory, and to touch on some of the common changes you
may need to make. This is not a comprehensive guide for all networking issues. You must have your
Network Administrator determine the actual network configuration for the Matchprint Professional
Server.
1. Initial Configuration
The Matchprint Professional Server ships with the following configuration:
Operating System and notable other software:
• Windows 2000 Server with Service Pack 2 installed
• Internet Information Server (IIS)
• Internet Explorer 5.5 with SP2 installed
• Adobe Acrobat Reader 5.05
• Matchprint Professional Server software version 3.0 (or higher)
Default Computer Logon:
• Logon = Administrator with no password
Networking:
• Computer Name = Matchprint Professional Server-DFE or similar name for factory testing
• Primary Workgroup or Domain = WORKGROUP
• Networking Protocol = TCP/IP
• TCP/IP address = Obtain an IP address automatically (from a DHCP server)
• Network Interface Card (NIC) = configured to Auto detect link speed and duplexing
• Additional Network Services installed:
File Services for Macintosh
Print Services for Macintosh
Print Services for Unix
The Matchprint Professional Server DFE software uses the built in Windows 2000 Server networking
services, protocols, and printing services. These are standard services and allow the network
administrator to easily integrate the Matchprint Professional Server DFE into existing networks. The
Matchprint Professional Server DFE network is set initially to WORKGROUP so that initial testing can be
accomplished prior to adding the Matchprint Professional Server DFE to a network domain.