Filter
Top Products
Status, Error, and Service Messages294
SCANNER MOTION ERROR
CHECK SCANNER LOCK
The scanner is
locked.
Move the scanner lock
lever to , and then
turn the machine off,
then on again. For
details, refer to
“Unlocking the Scan-
ner” on page 246.
SCANNER UNIT OPEN
CLOSE SCANNER UNIT
The scanner unit is
open.
Close the scanner unit.
SERVER MEMORY FULL
SMTP Server
The memory of the
SMTP server has
become full.
Free up some space
on the disk, for exam-
ple, by contacting your
server administrator.
THE PARTY IS FULL
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
TONER EMPTY
CHANGE x TONER
The indicated toner
cartridge has
become empty.
(This message
appears if TONER
EMPTY
on the
MACHINE SET-
TING menu is set to
STOP.)
Replace the indicated
toner cartridge.
Toner Low x
The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.
Prepare the indicated
toner cartridge.
Trans. Belt Life
The time to replace
the transfer belt unit
has been reached.
Replace the transfer
belt unit.
This message... means... Do this...