Filter
Top Products
Configuration Menu Overview
47
" Manufacturer’s default settings appear in bold.
ADMINISTRATOR NO.
Specify the new administrator access
code.
REMOTE MONITOR
Setting
OFF / ON
Select whether or not setting remote
monitor.
If
ON is selected, technical support can
access the menu mode.
If
OFF is selected, technical support
cannot access the menu mode.
" This setting is for technical
support uses. Change the setting
only when it is necessary.
NETWORK
SETTING
TCP/IP
Setting
DISABLE / ENABLE
Select the setting for connecting to this
machine through a network.
IP ADDR. SET-
TING
Setting
AUTO / SPECIFY
Set the IP address of this printer on the
network.
If AUTO is selected, the IP address will
be assigned automatically.
If SPECIFY is selected, manually spec-
ify settings for
IP ADDRESS, SUB-
NET MASK
and GATEWAY.
DNS DNS
AUTO
SET-
TING
Setting
DISABLE / ENABLE
Select whether or not the DNS server
address is automatically assigned by
the DHCP server.
SPEC-
IFY
Specify the DNS server address (up to
three addresses).
The default setting is “0.0.0.0”.
DHCP
Setting
DISABLE / ENABLE
If there is a DHCP server on the net-
work, specify whether the IP address
and other network information is auto-
matically assigned by the DHCP server.