Filter
Top Products
bizhub C360/C280/C220 5-66
5.12 Communication Settings
5
Reference
- For the bulletin board number, enter the box number between 1 to 999999999 of the Bulletin Board
User Box that has been registered in advance.
- Only one document can be saved in a single bulletin board.
- You can create up to 10 bulletin boards for this machine.
d Reference
For details on deleting or checking documents in the Bulletin Board User Box, refer to the [User's Guide Box
Operations].
F-Code transmission (F-Code TX)
This function allows you send documents to a specific User Box of the remote machine by entering the SUB
address and the password. Specific User Boxes include the followings.
- Confidential TX
– Documents are sent to the Confidential RX User Box of the remote machine. Enter the destination User
Box number in the SUB Address box and the confidential transmission password in the Password box.
- Relay TX
– Documents are sent to the Relay Distribution User Box of the remote machine when the remote ma-
chine supports the relay distribution function. Enter the Relay Distribution User Box number in the SUB
Address box and the password in the Password box.
Reference
- To use the F-Code for transmission, the remote machine must support the F-Code function.
5.12.5 E-Mail Encryption (E-mail)
This item is displayed when [S/MIME Communication Settings] is set to [ON] in Administrator Settings - [Net-
work Settings] - [E-Mail Settings]. Specify whether to encrypt E-mails to be sent from this machine.
d Reference
For details on the S/MIME Communication Settings, refer to the [User's Guide Network Administrator].
5.12.6 Digital Signature (E-mail)
This item is displayed when [S/MIME Communication Settings] is set to [ON] in Administrator Settings - [Net-
work Settings] - [E-Mail Settings]. Select whether to add a digital signature to E-mails to be sent from this
machine.
Reference
- You may not be able to add a digital signature or you may be forced to add a digital signature depend-
ing on the S/MIME communication settings.
d Reference
For details on the S/MIME Communication Settings, refer to the [User's Guide Network Administrator].