Filter
Top Products
bizhub C360/C280/C220 10-20
10.4 Administrator Settings (G3)
10
3/3 page
3/3 page (If two units of the Fax Kit FK-502 are installed)
Item Description
[Tray Selection for RX
Print]
If you want to fix the paper tray used to print received faxes, select the paper
tray.
The available tray types vary depending on the options that are installed.
[Min. Reduction for RX
Print]
Specify the reduction ratio for received document to Full Size or a value be-
tween 87 and 96%.
• If the reduction ratio for printing is set to [Full Size], [Print Paper Selection]
and [Tray Selection for RX Print] are set to [Auto]. Or [Print Separate Fax
Pages] is set to [OFF].
[Print Separate Fax Pag-
es]
If this item is set to ON, a document longer than the standard size is printed
on separate pages.
• [Print Separate Fax Pages] does not appear if [Duplex Print (RX)] is set to
ON.
[File After Polling TX] Specify whether to delete the original after completing polling TX.
Item Description
[No. of Sets (RX)] Set the number of copies for received documents to any number from 1 to
10 (Default: 1 set.).
[Individual Receiving
Line Setup]
Specify whether to configure the RX setting for each line.
Displays if 2 units of the Fax Kit FK-502 are installed.
[Individual Sender Line
Setup]
Specify whether to configure the sender setting for each line.
Displays if 2 units of the Fax Kit FK-502 are installed.