Filter
Top Products
Troubleshooting
13
Di2510/Di3010/Di3510 13-5
* If the problem is not corrected even after the operations described above are performed,
contact your service representative.
The edge of the printed
output is dirty.
The document pad is dirty. Clean the document pad with
a soft cloth dampened with a
mild detergent.
The selected paper size is
larger than the document
(with Zoom set to “×1.000”).
Select a paper size that is
the same size as the
document.
Otherwise, set Zoom to
“Auto Size” to enlarge the
copy to the selected paper
size.
The orientation of the
document is different from
the orientation of the copy
(with Zoom set to “×1.000”).
Select a paper size that is
the same size as the
document. Otherwise, select
a paper orientation that is the
same as the that of the
document.
The copy was reduced to a
size smaller than the paper
(a Custom Zoom setting was
selected).
Select a zoom ratio that
adjusts the document size to
the selected paper size.
Otherwise, set Zoom to
“Auto Size” to reduce the
copy to the selected paper
size.
Symptom Possible Cause Remedy