Filter
Top Products
28
VP-770 - The OSD Menu
Setting
Function
Embedded
Set:
Pass-through – to On to pass the digital audio input directly to the output
without any processing or set to Off to process the digital audio input E
Note that this feature is disabled for the non-embedded audio inputs
(PC, CV, YUV).
In case the audio signal is encrypted or compressed set the Pass-
through to On. Note that in some cases there may not be sufficient
capacity to accurately transmit the audio.
Analog Takeover – to On for the analog inputs of the HDMI and DP inputs
to take over the embedded inputs; select Off to use the embedded inputs E.
Analog takeover is available only if an unbalanced audio signal is connected
(via the 3.5mm connecter). The embedded audio is disabled as long as the
3.5mm cable is connected to the 3.5mm mini jack
Delay
Set:
Lip Sync delay value [msec] E
Mic Delay value [msec] E
Power
Amplifier
Set the power amplifier (SPKR) level to Off or to levels 1 to 4 E
This submenu item is specific for the power amplifier, on top of the general volume
level
SDI
Channeling
Note that SDI is not applicable to the VP-770 and appears
transparent in the OSD. The commands related to SDI in the
OSDmenu are therefore grayed out.
If the transparency of the OSD menu is set to ON this menu item will become
invisible (see Section 6.8)
Figure 18: Set the Output Volume Level
i
i