Filter
Top Products
52
VP-770 - Controlling the VP-770
8.7 Controlling via the Infrared Remote Control Transmitter
This IR remote control transmitter is compatible with various Kramer
machines, therefore not all its buttons are applicable to the VP-770.
The table below defines only the buttons that are relevant to the
VP-770; the functionality of the other buttons is marked N/A.
Figure 32: Infrared Remote
Control Transmitter
Keys
Function
POWER
Toggle the power save mode ON or OFF
PIP
Enter the dual window mode (the latest
setting), see Section 7.2
Note that while browsing the OSD menu
in the dual window mode, a short press of
the PIP button will instantly toggle the
window control (between Main and PiP)
BLANK
Toggle between a blank screen, black
screen and the display (for both windows)
FREEZE
Freeze/unfreeze the output video image
(for both windows)
MAIN Source Inputs
HDMI1
Select the HDMI 1 input
HDMI2
Select the HDMI 2 input
DP
Select the DisplayPort input
PC1
Select the UXGA 1 input
PC2
Select the UXGA 2 input
SDI
N/A
CV1
Select the composite video 1 input
CV2
Select the composite video 2 input
YPbPr
Select the component video input
Press ENTER to access the menu levels
(when in the OSD)
Use the up and down arrows to adjust the
numerical values and to adjust the output
volume level (when not within the OSD)
MENU
Enter/Exit the OSD menu and return to
the previous menu level
MUTE
Toggle between muting (blocking out the
sound) and enabling the audio output
PIP Source Inputs
HDMI1
Select the HDMI1 input
HDMI2
Select the HDMI2 input
DP
Select the DisplayPort input
PC1
Select the UXGA 1 input
PC2
Select the UXGA 2 input
SDI
N/A
CV1
Select the composite video 1 input
CV2
Select the composite video 2 input
YPbPr
Select the component video input
LOCK
Lock the front panel buttons
RESET to
XGA/720P
Press and hold to reset to the default
resolution (toggles between RESET TO
XGA and 720p)
i