Filter
Top Products
40
VP-770 - The OSD Menu
1. Set the dedicated EAS Ethernet connection port type and port number
through which the VP-770 will be listening, as a client, to intercept alerts.
By default, the dedicated EAS port settings are TCP, 5005. To change these
setting see the “Emergency Alert Configuration” in the table in Section 12.4.
2. Make sure that the VP-770 is connected to Ethernet.
3. Make sure that Alert System in the Miscellaneous menu is set to On (see
Section 6.8).
The VP-770 is now ready to receive any alert and display it.
6.8.2.1 EAS Requirements
The following table specifies the EAS requirements:
Text Length Definitions
Attribute Name
Max Size
Status
Certainty
Urgency
Severity
Event
Headline
Description
Instruction
Sender
Sent
Max 30 contiguous chars per word
Output Resolution
The output resolution needs to be at least 1280x768