3-1
3 Basic Operation
This chapter explains the following operations. For other functions, refer to the Advanced
Operation Guide.
• Basic Copying Procedure
• Zoom Copying
• Duplex Copying
• Split Copying
• Sort Copying
• Combine Copying
• Interrupt Mode
•Low Power Mode
•Sleep Mode
• Basic Printing Procedure
Basic Copying Procedure
1
Open the main power switch cover located on the right
side of the machine and turn the main power switch on
( | ). At the end of warm-up, the Start indicator lights up
green.
2
Set the original onto the platen. Be sure to set the
original by aligning it with the left rear corner of the
platen along the original size indicator plates.
Note For the method of setting originals in the optional document processor, see Setting Originals in
the Document Processor on page 4-2.