4.EDITING FUNCTIONS
Cover Sheet 121
4 EDITING FUNCTIONS
7
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF, scanning and copying start.
When they are placed on the original glass, follow steps 8 and 9.
8
Place the next original, and then press the [START] button.
Scanning of the next original starts. The scanning also starts when you press [YES] on the touch panel and then
press the [START] button on the control panel. Repeat this procedure until the scanning of all the originals is
finished.
9
When the scanning of all the originals is finished, press [FINISHED] on the touch panel.
Copying starts.