Kyocera FS-1300D All in One Printer User Manual


 
5.IMAGE ADJUSTMENT
Using Image Adjustment Functions 155
5 IMAGE ADJUSTMENT
4
Select a color for the black part in the original.
1) Press [CHANGE BLACK TO].
2) Select the desired color.
After selecting the color, press [OK]. This is the end of the setting.
If you want to adjust the color balance, press [ADJUST] and go to the next step.
y When the two colors specified are the combination of black and a color other than black, color balance
adjustment is enabled. When neither of the two colors is black, or when both of the two colors are black, this
adjustment is disabled.
y The color balance of a color other than black can be adjusted.
5
Press or of the color to obtain the desired color balance.
After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step.