Filter
Top Products
3 BASIC COPY MODES
80 Selecting Finishing Mode
The magazine sort mode can also be selected on the EDIT menu. If you select it on the EDIT menu, you can adjust the
binding margin. For the details, see the following page:
P.110 “Magazine Sort Mode”
1
Place paper in the drawer(s).
Special paper such as OHP film or sticker labels is not available.
2
Select the desired paper size.
Sizes are available as follows:
Magazine sort: A3, A4-R, A5-R, B4, B5-R, LD, LT-R, LG, ST-R
Magazine sort & saddle stitch, Saddle stitch: A3, A4-R, B4, LD, LT-R, LG
3
Place the original(s).
When placing the originals on the RADF, place them according to the illustration on the previous page.
When placing the originals on the original glass, place them in the following order:
Magazine sort, Magazine sort & saddle stitch: Place the first page of the original first.
Saddle stitch: For example, if the total number of pages is 12, place pages 1 and 12 together, and then pages
2 and 11, then pages 10 and 3, then pages 4 and 9, then pages 8 and 5, then pages 6 and 7.
4
Press [FINISHING] on the touch panel.