Filter
Top Products
FAX Operation (Basic)
3-2
Automatic Send
General transmission using the numeric keys is explained.
Switching to the Send Screen
1 Press the FAX key. Check that the basic send screen is
displayed.
NOTE: Depending on the settings, the Address Book
screen may appear. In this event, press Reset to display the
basic screen for sending.
Selection of Transmission Method
2 There are two transmission methods - memory
transmission and direct transmission. The default is
memory transmission.
To select direct transmission, use the following
procedure.
1 Press the Function Menu key.
2 Press the U or V key to select [FAX Direct TX].
3 Press the OK key.
4 Press the U or V key to select [On].
5 Press the OK key.
NOTE: In direct transmission, you can designate only one
destination for one transmission.
Memory Transmission (When originals are placed in the document processor)
After originals placed in the document processor are scanned and stored in the memory, the receiving system is
dialed. This method is very convenient because you can have originals returned to you without waiting for sending of
the originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After originals
placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
Ready to send.
2009/05/25 12:30
Text+Photo 200x100dpi
[Orig.Img] [FAX Res.]
Setting for Direct
transmission
Description
Off Starts memory transmission.
After originals are scanned into memory, the communication starts.
On Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.