Filter
Top Products
FAX Operation (Basic)
3-4
Address Recall/Pause
Pressing this key adds about three seconds of waiting
time during dialing. For example, when dialing the
receiving system on an external line, you can use this
method to insert a pause before resuming dialing after
you dial a specific number.
Make detailed settings for sending as necessary. Press
[Detail] (the Right Select key) to display the FAX Detail
menu. Press the Y or Z key to select [Sub Address],
[Encrypted TX], [TX Start Speed] or [ECM] and change
settings, and then press the OK key.
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine starts
dialing to the receiving system.
After pressing this key, you can dial the number of the
receiving system using the numeric keys. For details, refer to
Manual Send on page 4-8.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-13.)
• Using One-touch keys (Refer to page 3-22.)
• Manual Redial (recall) (Refer to page 3-24.)
NOTE: In addition to fax, you can include e-mail
transmission and/or folder (SMB/FTP) transmission in a
single transmission job (Multi Sending). For details, refer to
Sending in the Operation Guide for the machine.
FAX No. Entry:
A
b
0123456789
*
[ Chain ] [ Detail ]
Key Description
Sub Address To communicate using the sub address, change this
setting. For details, refer to Sub Address
Communication on page 4-25.
Encrypted TX To send faxes using encryption, change this setting.
For details, refer to Encryption on page 6-24.
TX Start Speed To change the transmission start speed, change this
setting. Select the speed from 33,600 bps, 14,400 bps,
and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of noise on
the telephone line during transmission. To change the
ECM communication setting, change this setting.