Filter
Top Products
4
FAX Operation (Advanced)
4-21
Settings for Memory Forwarding from COMMAND CENTER (Forward)
You can use COMMAND CENTER on a computer connected to the network to specify the memory forwarding
settings on this machine.
Refer to the machine’s Operation Guide for information on the network settings.
Accessing COMMAND CENTER
1 Open the web browser.
2 In the Address or Location bar, enter the machine’s IP
address as the URL, e.g. http://192.168.48.21/. The web
page displays basic information about the machine and
COMMAND CENTER as well as the current status of the
machine.
3 Select a category from the navigation bar on the left to
view and set values for that particular category.
4 If administrator privileges have been enabled on
COMMAND CENTER, remember to enter the correct
user name and password when trying to access the
relevant screens.
Setting Administrator Password restricts general users'
access to pages other than the Start page. For security
purposes, setting the Administrator password is highly
recommended. The default Administrator password is
factory-set as admin00.