Filter
Top Products
Troubleshooting
24 OPERATION GUIDE
Print Quality Problems
The table below describes potential print quality problems and the
corrective action for each problem.
Paper Jams
The printer will stop when a paper jam occurs in the printer or if paper is
misfed. The printer will go offline and the Attention Indicator will fast flash.
Follow the instructions provided here to clear the jam. If paper jams occur
frequently, try using a different type of paper, replace the paper using a
new ream, or turn the paper over. Also, look for tiny pieces of paper which
may have been left in the printer.
If the problem persists, contact your local Service Technician for
assistance.
Printed Results Corrective Action
All black pages Contact your Service Technician.
Dropouts, horizontal streaks or
stray dots
Clean the charger wire, refer to page
21 for information.
Black or white vertical streaks Check the toner container and if
necessary replace. Refer to page 18
for information.
Clean the charger wire, refer to page
21 for information.
Check the charger cleaner is in its
original position. Refer to page 21 for
information.
Faint or blurred printing Check the toner container and if
necessary replace. Refer to page 18
for information.
Clean the charger wire, refer to page
21 for information.
Gray background Check the toner container and if
necessary replace. Refer to page 18
for information.
Check the developer unit and drum
unit are installed correctly. Refer to
page 21 for information.
Dirt on the top edge or back of the
paper
Check the registration roller is not
soiled with toner. Refer to page 21 for
information.