Filter
Top Products
9-6
Fax Settings > Default fax settings
Common Settings
Configures overall machine operation.
Sound
Function Defaults
FAX
Settings related to the fax function can be configured.
TX/RX Common
Item Description
Buzzer Set options for buzzer sound during the machine operations.
Job Finish Emit a sound when a print job is normally completed.
Value: Off, On, FAX Reception Only
FAX Speaker Volume Adjust the volume of the speaker.
Speaker Volume: Volume of the built-in speaker when the line is connected by pressing the On
Hook key.
Value: [1] (Minimum), [2], [3] (Medium), [4], [5] (Maximum), [0] (Mute).
FAX Monitor Volume Adjust the volume of the monitor.
Monitor Volume: Volume of the built-in speaker when the line is connected without pressing the
On Hook key such as in memory transmission.
Value: [1] (Minimum), [2], [3] (Medium), [4], [5] (Maximum), [0] (Mute).
Item Description
FAX TX Resolution Select the default scanning resolution.
Value: 400 × 400dpi Ultra Fine, 200 × 400dpi Super Fine, 200 × 200dpi Fine, 200 × 100dpi
Normal
Item Description
Encryption Key Registration This is used to register an encryption key for encrypted communication.
Refer to
Encryption on page 6-36.
FAX Remote Diagnosis If a problem arises with this machine and you contact our service representative, this feature
enables our Service Center computer to access the machine over the phone and check the
machine’s status or look for problems.
NOTE: To use Remote Diagnostics, you must first sign an agreement with our service
representative and register a Predetermined ID on the machine. For more information,
contact your Service Representative or Authorized Service Center.
Value: On, Off
Remote Diagnostics ID If you have turned on Remote Diagnostics, enter the predetermined ID.
Value: 0000 - 9999