Filter
Top Products
4-3
Sending Faxes > Basic transmission procedure
4
Select the transmission method
There are two transmission methods: memory transmission and direct
transmission.
Memory transmission: The original is scanned into memory before
communication starts. Memory transmission is selected by default.
Direct transmission: The destination is dialed and communication
starts before the original is scanned.
Press [Direct] to change the transmission method to direct
transmission. The key will be highlighted on the touch panel. If the
[Direct] is pressed in the highlighted state, the transmission method will
change to memory transmission.
For details, refer to Direct Transmission on page 4-14.
5
Selecting the functions
Set functions such as the scanning density and fax resolution.
Press [Function Menu] to display all the functions.
For details, refer to Fax transmission functions on page 4-8.
6
Send Start
When scanning finishes, transmission starts.
When originals are placed in the document processor
After originals placed in the document processor are scanned and
stored in the memory, the receiving system is dialed.
When originals are placed on the glass surface
After originals placed on the glass surface are scanned and stored in the
memory, the receiving system is dialed.
For details, refer to Continuous Scan on page 4-13.
NOTE
When continuous scan is set, you can continue with scanning of a
next original after an original on the glass surface has been stored in
memory. Every time one page is scanned, you perform an operation
to allow continued scanning, and after all the originals have been
stored in memory, the receiving system is dialed.
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
GB0669_00
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
GB0669_00