Filter
Top Products
Chapter 2 Basic Operations 2-7
7. Insert the leading edge of roll paper under the Guide Plate (9) until the edge touches the
feeding roller.
Then rotate the Paper Feeding Knob (10) clockwise so that the feeding rollers catch the roll
paper.
8. When the feeding rollers catch the paper, hold and pull the dent part (12) to the arrow direction
to open the paper guide, and rotate the Paper Feeding Knob (10) until the leading edge comes
out from the slit about 10cm.
NOTE
In case of Roll 2, rotate the Paper Feeding Knob
of rear side (11).
9
Leading edge
of roll paper
11
10
10
12