Kyocera KM-3650w Scanner User Manual


 
Chapter 3 Error Correction 3-17
3. 1. 3. 3 Toner empty. Replace the toner cartridge.
When “Toner empty.” is displayed, replace the Toner Cartridge with the new one.
Refer to [2.4 Replacement of Toner Cartridge] on page 2-9 for the way to replace the Toner
Cartridge.
3. 1. 3. 4 In Warm Sleep Mode
When “In Warm Sleep Mode.” is displayed, KM-3650w is in the Warm Sleep Mode to save the
power consumption.
(1) The Warm Sleep Mode works automatically if you make no operation for the time
specified in advance.
The temperature maintained on the Fuser Unit is fallen down great degrees to save the
power consumption.
(2) The Warm Sleep Mode will be cancelled by the following 3 ways.
Making a print from the network
Inserting an original to the scanner
Pressing any key on the Operation Panel
Note that it takes some minutes to recover from the Warm Sleep Mode as the
temperature of Fuser Unit must be raised again.
(Print starts when the machine gets ready.)
Reference