Filter
Top Products
Chapter 4 Maintenance 4-2
4. 1 Cleaning of Each Part
4. 1. 1 Scanner Unit
Clean each Scan Glass, Feeding Rollers and Guide Plates once per a week, as the scan/copy
image may become defective if these parts are dirty.
1. Confirm that the machine is turned off.
2. Open the Scanner Unit pulling up the Levers (1).
3. Wipe each Scan Glass (2) and Feeding Rollers (3) with a soft cloth.
Use the neutral detergent mixed with 50% of water as the cleaner.
NOTE
Do not use organic solvent, glass cleaner and anti-static spray for the cleaning.
1
23
3