Filter
Top Products
Troubleshooting
4-5
Dirt on the top edge or back of the paper Clean the inside of the printer.
Open the left cover 1 and check if the inside is dirty. If dirty, clean the
inside with the cleaning cloth included in the toner kit.
Printing incomplete or out of position Check the file or program.
Check whether the problem is being caused by a PRESCRIBE command
error. If the problem occurs only with a specific file or program, the most
likely cause is an error in a parameter to a command or command syntax.
Color on the data and actual printout are
different.
Perform color calibration.
Perform color calibration either by switching the printer off then on or using
the printer operation panel. For full details, refer to the Using the Operation
Panel section in the Advanced Operation Guide.
Printed Results Corrective Action