Filter
Top Products
Chapter 5 Troubleshooting
5-3
Symptom Check Items Corrective Action
Nothing lights on the
control panel even
when power is turned
on and the fan makes
no noise.
Check that the power cord is
properly plugged into the power
outlet.
Turn off the printer's power, plug in the
power cord securely, and try turning on the
printer's power again.
Check that the power switch is really in the on position.
The printer prints a
status page, but data
from the computer is
not being printed
normally.
Check the interface cable. Connect both ends of the interface cable
securely. Try replacing the printer cable. For
details on the parallel interface of this printer,
see Appendix C.
Check program files and application
software.
Try printing another file or using another
print command. If the problem occurs only
with a specific file or application, check the
printer settings for that application.
If you still cannot correct a printer problem even after checking the above, please contact your
Kyocera dealer.