Kyocera FS-600 Printer User Manual


 
Selecting the Right Paper
B-8
Electrostatic properties
During the printing process the paper is electrostatically charged to attract the toner. The paper must
be able to release this charge so that printed sheets do not cling together in the output tray.
Quality control
Uneven sheet size, corners that are not square, ragged edges, welded (uncut) sheets, and crushed
edges and corners can cause the printer to malfunction in various ways. Pay particular attention to
these considerations if you are choosing paper yourself.
Packaging
Select paper that is wrapped by the ream and then placed in a box. The best wrapping is one whose
inner surface is coated to protect again humidity.
Specially treated paper
We recommend that you avoid using paper listed below which has been specially treated, even if it
meets basic specifications. If you wish to use such paper, test a sample on the printer and check that
printing quality is satisfactory before purchasing.
Paper with a glossy finish
Paper with sections cut out
Paper which is embossed
Paper with feed holes in it
Paper with punch holes in it