Filter
Top Products
4. Using Your LaCie Drive
page 17
LaCie Data Bank Hi-Speed USB 2.0
User’s Manual
8) This will bring up the Create Partition Wizard. Click Next.
9) Select Primary Partition. Click Next.
10). Here you must specify partition size. It is recommended that you leave
the partition set to the maximum available size, unless you want multiple
partitions on the same drive. Click Next.
11) Select Assign drive letter and select the desired letter for the drive. Click
Next.
12) Select Format this partition… and then select a file system:
FAT32
FAT32 is a file system that is compatible with Windows 98 SE, Windows Me, Windows 2000 and Windows XP; however, it
has limitations. In Windows 2000 and Windows XP, you will not be able to create a partition greater than 32GB.
NTFS
NTFS is a newer file system that is compatible only with Windows NT, Windows 2000 and Windows XP. It has fewer
limitations than FAT 32 and will enable a partition to be created that is larger than 32GB.
Tech Note:
Please refer to section 5.1.1. File System Formats – Windows Users, for a more detailed discussion
on the differences between the two systems.
13) Click Next.
14) Click Finish.
15) Disk Management will create the partition and begin formatting the drive. Once completed, close Disk Management and
your new drive will be ready to use.