LaCie Databank Computer Drive User Manual


 
7. Troubleshooting
page 31
LaCie Data Bank Hi-Speed USB 2.0
User’s Manual
The Problem
The drive is not
recognized by the
computer.
Error messages under
Mac OS 10.x.
Questions to Ask
Have the USB or FireWire
drivers been installed correctly
and enabled?
Is there a conflict with other
device drivers or extensions?
Has the drive been formatted?
Does your computer’s operating
system support the file system?
Did you get an “Error –50”
message while copying to a FAT
32 volume?
Did you get an error message
telling you that the drive has
been disconnected when coming
out of sleep mode?
Possible Solutions
Mac Users: Open Apple System Profiler and click on the
Devices and Volumes tab. If your device is not listed,
recheck the cables and try the other troubleshooting tips
listed here.
Contact LaCie T
echnical Support for help.
Make sure that the drive has been formatted properly. Please
see sections 4.1. For
matting And Partitioning Your LaCie
Drive and 5.1. File System Formats for more information.
Check your computer’s documentation and see sections 4.1.
Formatting And Partitioning Your LaCie Drive and 5.1. File
System Formats for more information.
When copying files or folders from Mac OS 10.x to a FAT
32 volume, certain characters cannot be copied. These
characters include, but are not limited to:
? < > / \ :
Check your files and folders to ensure that these types of
characters are not being used.
Simply ignore this message. The drive will remount to the
desktop. LaCie drives conserve power by spinning down
when you set your computer to sleep mode, and when the
computer is “woken” from sleep, it does not give the drive
enough time to spin-up from its sleep mode.