LaCie Little Disk • Design by Sam HecHt Getting Connected
User Manual page 9
2.1. Connect the USB Interface Cable
MANUAL NOTE:
✔ Little Disk Pocket Hard Drive USB 2.0
✔ Little Disk Portable Hard Drive USB 2.0
✔ Little Disk Portable Hard Drive USB/FireWire)
1. Remove the cap.
2. Pull out the integrated USB 2.0 cable until it stops (Fig. 01). The
cord is about 2 inches long; do not attempt to pull it out farther.
3. Insert the USB 2.0 connector into an available USB 2.0 port on
your computer (Fig. 02).
4. After a few seconds, the hard drive will mount on your computer
and appear on the desktop (Mac users) or in My Computer
(Windows users).
5. Proceed to section 2.4. Launching LaCie Setup Assistant.
IMPORTANT INFO: If your Little Disk Portable Hard Drive does
not power on within a few seconds of connecting the USB interface
cable, proceed to section 2.3. Connect the Optional Power Sharing
Cable.
Fig. 01
Fig. 02
Little Disk Portable Hard Drive
Little Disk Pocket Hard Drive