Filter
Top Products
LaCie SAFE Hard Drive
User Manual
page 18
Configuring Your LaCie SAFE Drive
Click on an unselected finger to begin register-
ing a fingerprint. Click Next to continue. e
swipe dialogue appears.
is dialogue will request that you swipe the
selected finger over the fingerprint sensor. If
the swipe is successful, the dialog prompts you
to swipe the same finger a second and third
time for confirmation.
Your finger should lie flat in the recess. Make
sure the top of your finger touches the top of
the recess and slide it down slowly. For more
on how to use the fingerprint sensor see section
3.1. How to Use the Fingerprint Sensor.
When you have successfully swiped your fin-
ger three times, the swipe dialog displays three
check marks and then closes.
Once your fingerprint is successfully registered,
the dialogue closes and you’ll be returned to
the main Fingerprints registration screen. Now
you’ll need to register a second fingerprint.
1.
2.
3.
4.
5.3. Registering User Fingerprints
Swipe dialogue
ImpOrTANT INfO: If the swipe is not
successful, you’ll get an error dialog stating
that the swipe registration failed. Consult
section 10. Troubleshooting the Fingerprint
Sensor if you cannot get a successful swipe
after several attempts.
ImpOrTANT INfO: Each user must reg-
ister at least two fingerprints in order to use
the drive. at way, if one finger is injured
and must be bandaged, the user will still be
able to access the drive.
ImpOrTANT INfO: Screenshots may be
differ slightly on your computer.
Begin fingerprint registration