Filter
Top Products
LaCie SAFE Hard Drive
User Manual
page 20
Using Your LaCie SAFE Drive
Once you’ve set up your LaCie SAFE drive
with at least one user, then you can start to use it.
If the drive is currently disconnected, first connect
it (see section 4. Connecting Your LaCie Drive
for more information). Now you are ready to get
started!
6. Using Your LaCie SAFE Hard Drive
Step 1
6.1. Using the Drive as a Registered User
Page 20
Step 2
6.2. Using the Drive as an Administrator
Page 21
Step 3
6.3. Using Multiple SAFE Drives on the Same Computer
Page 23
Step 4
6.4. Locking Your Drive
Page 24
Step 5
6.5. Disconnecting Your Drive
Page 25
Once your drive is plugged in and switched on,
a window appears asking you to swipe your fin-
ger over the sensor.
is is the first screen you will see with normal
use. To unlock your LaCie SAFE Hard Drive,
place a registered finger flat in the recess of the
fingerprint sensor. Make sure the top of your
finger touches the top of the recess and slide it
down slowly. For more on how to use the fin-
gerprint sensor see section 3.1. How to Use the
Fingerprint Sensor. If you are having trouble
getting the fingerprint sensor to recognize you,
see section 10. Troubleshooting the Fingerprint
Sensor.
1.
2.
6.1. Using the Drive as a Registered User
TeChNICAl NOTe: Windows Users: At
this point, only an empty, removable disk
mounts in your My Computer folder. Once
you have logged in, the whole storage vol-
ume will mount.
SAFE Drive Tool: Welcome screen