Filter
Top Products
Copying
38
2
Basic Functions
The following basic functions are ex-
plained in this section.
❖
❖❖
❖
Adjusting Copy Image Density
Auto and Manual Image Density
❖
❖❖
❖
Selecting Original Type Setting
Text, Text·Photo, Photo, Pale, and
Generation Copy
❖
❖❖
❖
Selecting Copy Paper
Auto Paper Select and Manual Pa-
per Select
❖
❖❖
❖
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
❖
❖❖
❖
Sort
Copies can be assembled as sets in
sequential order.
❖
❖❖
❖
Rotate Sort
Every other copy set is rotated by
90°
KL
and delivered to the copy
tray.
❖
❖❖
❖
Stack (The optional Bridge unit and an
optional finisher are required for this
function)
Copies can be assembled with each
page placed.
❖
❖❖
❖
Staple (The optional Bridge unit and
an optional finisher are required for
this function)
Each copy set can be stapled to-
gether.
Note
❒ You can select the functions to be
activated when System Reset is
turned on, when Energy Saver is
turned off, or after the machine is
turned on.
❒ You can change the default set-
tings for basic functions.
Reference
⇒ "Settings You Can Change with
the User Tools" in System Settings
manual
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three types of adjustment
available:
❖
❖❖
❖
Auto Image Density
The machine automatically adjusts
the image density.
❖
❖❖
❖
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
❖
❖❖
❖
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.