Filter
Top Products
Troubleshooting
7-13
Replacing the Snap-in Pad Module
After scanning approximately 20,000 pages through the ADF, the pad may
be worn out and you may experience problems with document feeding. In
this case, it is highly recommended to replace the pad module with a new
one. For ordering the pad module, please consult your nearest dealer and
follow the procedure below to replace it.
Disassembling Procedure
1. Gently open the ADF front cover to the left.
2. Press both arms of the ADF snap-in pad module inwardly with your fingers
to pull out the ADF snap-in pad module.
Do not touch the metal fingers of the ADF pad module. The edges are sharp and
touching them may result in injury.