Filter
Top Products
3: Command Line Interface
IntelliBox-I/O 2100 Command Reference 12
Figure 3-1 CLI Level Hierarchy
Commands at the login level, shown in Figure 3-2, do not affect current configuration settings and
are not displayed initially. If you type <?>, you will see the login sub-commands. These commands
provide diagnostic and status information only.
Figure 3-2 Login Level Commands
>?
clrscrn enable
exit ping <host>
ping <host> <count> ping <host> <count> <timeout>
show show history
show ibio2100 trace route <host>
>
(login) enable
ssh
ethernet linkif 1
lpd <number>
rss
line <line>
io
chem
<number>
configure
modbus
device
filesystem
lpd
ip
arp
eventtrak
(number)
ftp
host <number>
http
ip filter
query port
terminal
<number>
tcp
snmp
syslog
tunnel <line> accept
connect
disconnect
modem
packing
serial
icmp
cli
match
<number>
task <number>
udp
tftp
ssl