Filter
Top Products
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 52
password
Enters the next lower level.
protocol ssh
Uses SSH protocol for accept mode tunneling.
protocol ssl
Uses SSL protocol for accept mode tunneling.
protocol tcp
Uses TCP protocol for accept mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for accept mode
tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for accept mode tunne-
ling.
rss trace connections disable
Disables RSS Trace of accept mode connections.
rss trace connections enable
Enables RSS Trace of accept mode connections.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel accept status.
tcp keep alive <milliseconds>
Enables TCP keep alive for accept mode tunneling and
sets the timer.
write
Stores the current configuration in permanent memory.
arp (config-arp) level commands
add <IP address> <MAC address>
Adds an entry to the ARP table, mapping an IP address to
a MAC address.
clrscrn
Clears the screen.
default timeout
Restores the default ARP cache timeout.
exit
Exits to the configuration level.
remove <IP address>
Removes an entry from the ARP cache.
remove all
Removes all entries from the ARP cache.
show
Displays the current configuration.
show cache
Displays the ARP cache table.
show history
Displays the last 20 commands entered during the current
CLI session.
timeout <seconds>
Sets the ARP cache timeout.
write
Stores the current configuration in permanent memory.
chem 1 (chem:1) level commands
auto show statistics
Continuously displays email statistics.
cc <email addresses>
Sets Cc addresses for email alerts.
chem <number>
Enters the configure email level.
clear log
Clears all entries from the mail log.
clear mail counters
Sets the email counters to zero.
clrscrn
Clears the screen.
exit
Exits to the enable level.
file
<file>
Specifies a text file, the contents of which will be the mes-
sage body
from <email address>
Sets the From address for email alerts.
local port <number>
Sets local port used to send email alerts.
local port random
Sets local port (used to send email alerts) to random.
no cc
Removes the Cc addresses for email alerts.
no clear mail counters
Restores the email counters to the aggregate values.
no file Removes the file name, so the message body will be
empty.