Filter
Top Products
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 65
file> <host> <port>
touch <file>
Create a file
ftp (config-ftp) level commands
admin password <string>
Sets the administrative password for the FTP server.
admin username <string>
Sets the administrative username for the FTP server.
clear counters
Zeros FTP counters.
clrscrn
Clears the screen.
default admin password
Resets the FTP password to the default (PASS).
default admin username
Resets the FTP username to the default (admin).
exit
Returns to the config level.
no clear counters
Unzeros FTP counters.
show
Displays the FTP settings and statistics.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Disables the FTP server.
state enable
Enables the FTP server.
write
Stores the current configuration in permanent memory.
host 1 (config-host:1) level commands
clrscrn
Clears the screen.
default protocol
Restores the default value of the protocol (Telnet).
default remote port Sets the remote port (used to connect to the host) to the
default value,
exit
Exits to the configuration level.
host <number>
Change to config host level
name <text>
Sets the name of the host.
no name
Clears the name of the host.
no remote address
Clears the remote address of the host.
no ssh username
Clears the SSH username associated with the host.
protocol ssh
Sets the protocol to SSH.
protocol telnet
Sets the protocol to Telnet.
remote address <text>
Sets the IP address of the remote host to connect to when
this host is
remote port <number>
Sets the remote port used to connect to the host.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
ssh username <text>
Sets the username for logging into the host via SSH.
write
Stores the current configuration in permanent memory.
host 2 (config-host:2) level commands
clrscrn
Clears the screen.
default protocol
Restores the default value of the protocol (Telnet).
default remote port Sets the remote port (used to connect to the host) to the
default value,
exit
Exits to the configuration level.
host <number>
Change to config host level
name <text>
Sets the name of the host.
no name
Clears the name of the host.