Filter
Top Products
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 60
email connect <number>
Sets an email profile to use to send an email alert upon
establishing
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
exit
Returns to the tunnel level.
flush serial disable Characters already in the serial data buffer are retained
upon establishing
flush serial enable
Flushes the serial data buffer upon establishing a connect
mode tunneling
kill connection
Disconnects the active connect mode tunneling connec-
tion.
local port
<number>
Sets a specific port for use as the local port.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no email connect
Discontinues sending email alerts upon establishing a
connect mode tunnel.
no email disconnect Discontinues sending email alerts upon closing a connect
mode tunnel.
no remote address
Removes the remote host address used to establish
tunneling connections.
no remote port
Removes the remote port used to establish tunnel con-
nections.
no ssh username
Removes the SSH user name.
no tcp keep alive
Disables the connect mode TCP keep alive timeout.
output select
Enters the next lower level.
protocol ssh
Uses SSH protocol for connect mode tunneling.
protocol ssl
Uses SSL protocol for connect mode tunneling.
protocol tcp
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode
tunneling.
protocol telnet Uses Telnet protocol (with IAC) for connect mode tunne-
ling.
protocol udp
Uses UDP protocol for connect mode tunneling.
protocol udp aes
Uses UDP protocol with AES encryption for connect mode
tunneling.
reconnect time <milliseconds>
Sets the reconnect time value for tunneling connections
established by the
remote address <text>
Sets the remote host to establish tunneling connections
with.
remote port <number>
Sets the remote port to use for connect mode tunneling.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel connect status.
ssh username <text>
Sets the SSH user name for use when establishing tunne-
ling connections
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
write
Stores the current configuration in permanent memory.
device (device) level commands