Filter
Top Products
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 67
cepts when receiving
max timeout <seconds>
Sets the maximum timeout the HTTP server waits when
receiving a request.
no clear counters
Restores the HTTP counters to the aggregate values.
port <number>
Sets the port number the HTTP server will use.
server disable
Disables the HTTP server.
server enable
Enables the HTTP server.
show
Displays the HTTP server settings.
show auth
Displays the HTTP server authentication settings.
show history
Displays the last 20 commands entered during the current
CLI session.
show log
Displays the HTTP server log.
show statistics
Displays the HTTP statistics.
ssl port <number>
Sets the port number the HTTP server will use over SSL.
ssl3 disable
Disables SSLv3 handling.
ssl3 enable
Enables SSLv3 handling.
tls1.0 disable
Disables TLSv1.0 handling.
tls1.0 enable
Enables TLSv1.0 handling.
tls1.1 disable
Disables TLSv1.1 handling.
tls1.1 enable
Enables TLSv1.1 handling.
write
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
auto show stats
Continuously shows ICMP statistics
clear counters
Zeros counters
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Unzeros IP counters
show
Displays the current configuration.
show history Displays the last 20 commands entered during
the current
CLI session.
show stats
Shows ICMP statistics
state disable
Prevents ICMP packets from being sent or received.
state enable
Allows ICMP packets to be sent and received.
write
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
bootp disable
Disables BOOTP.
bootp enable
Enables BOOTP.
clear host <string>
Removes an entry from the DNS Cache
clrscrn
Clears the screen.
default gateway <IP address>
Sets the configurable gateway IP address to the default
value.
dhcp client id binary <binary>
Sets the client id allowing binary characters.
dhcp client id set
<text>
Sets the client id in text format.
dhcp disable
Disables DHCP.
dhcp enable
Enables DHCP.
dhcp renew
Force DHCP to renew
domain <text>
Sets the domain name.