Filter
Top Products
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 80
incoming connection manual
Wait for an ATA command before answering an incoming
network connection.
no connect string
Removes optional CONNECT string information for mod-
em emulation.
reassert Asserts tunnel modem status with current configured val-
ues.
response type numeric
Uses numeric type responses.
response type text
Uses text type responses.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
status
Displays tunnel modem status.
verbose response disable
Does not send Modem Response Codes.
verbose response enable
Sends Modem Response Codes out on the Serial Line.
write
Stores the current configuration in permanent memory.
output select (tunnel-connect-output_select:2) level commands
clrscrn
Clears the screen.
default mode
Requires exclusive control of the output for connect mode
connection.
exit
Exits to the next higher level.
mode exclusive control
Requires exclusive control of the output for connect mode
connection.
mode logical-or
Does not require exclusive control of the output for con-
nect mode connection.
no output Discontinues enabling any output while the connect mode
connection is up.
output <text>
Selects an output to enable while the connect mode con-
nection is up.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
output select (tunnel-accept-output_select:2) level commands
clrscrn
Clears the screen.
default mode
Requires exclusive control of the output for accept mode
connection.
exit
Exits to the next higher level.
mode exclusive control Requires exclusive control of the output for accept mode
connection.
mode logical-or
Does not require exclusive control of the output for accept
mode connection.
no output
Discontinues enabling any output while the accept mode
connection is up.
output
<text>
Selects an output to enable while the accept mode con-
nection is up.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
output select (tunnel-connect-output_select:1) level commands