Filter
Top Products
Web-Manager Configuration
WiBox2100E User Guide 29
Figure 4-2. Network Settings
Automatic IP Address Configuration
To automatically assign an IP address and its network configuration:
1. Click Network from the main menu.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP
Enable permits the Bootstrap Protocol (BOOTP). The BOOTP
server assigns the IP address automatically from a pool of
addresses.
DHCP
Enable permits Dynamic Host Configuration Protocol (DHCP).
DHCP to assign a leased IP address to the WiBox unit
automatically.
Auto-IP
Enable permits the WiBox to generate an IP in the
169.254.x.x address range with a Class B subnet.
DHCP Host Name Enter the name of the host on the network providing the IP
address.
Note: Consult the System or Network Administrator before adjusting these
settings. Disabling all three methods is not advised as the only available IP
assignment method will then be ARP or serial port.
4. Click the OK button when finished.