Lantronix Ethernet Network Card User Manual


 
Setup Mode: Advanced Settings
WiBox2100E User Guide 69
Ethernet Connection Type
The WiBox allows for the Ethernet speed and duplex to be manually configured.
Enter 0 for auto-negotiation (default). To select the speed and duplex, enter one of
the following: 2 (10 Mbit/half duplex), 3 (10 Mbit/full duplex),
4 (100 Mbit/half duplex), or 5 (100 Mbit/full duplex).
Ethernet connection type: (0) ? _
Security Settings
Security settings can only be changed using Setup Mode, through a Telnet or serial
connection.
Note: As recommended, set security over the dedicated network or over the
serial setup. If the parameters are set over the network (Telnet 9999),
someone else could capture these settings.
Caution: Disabling both Telnet Setup and Port 77FE prevents users
from accessing the setup menu from the network.
Disable SNMP
For security purposes, disable SNMP (if required) on the WiBox unit. The current
setting displays in parentheses.
Disable SNMP (N) ? _
SNMP Community Name
The SNMP Community Name is a required field for NMS to read or write to a device.
Enter a string of 1 to 13 characters.
SNMP Community Name (public): _
The default entry is public. The current value displays in parentheses.
Disable Telnet Setup
Note: Disabling both Telnet Setup and Port 77FE prevents users from
accessing the setup menu from the network.
This setting defaults to the N (No) option. The Y (Yes) option disables access to
Setup Mode by Telnet (port 9999). It only allows access locally via the web pages
and the serial port of the unit.
Disable Telnet Setup (N) ? _
Disable TFTP Firmware Upgrade
This setting defaults to the N (No) option. The Y (Yes) option disables TFTP for
network firmware upgrades.
Disable TFTP Firmware Update (N) : _