Lantronix MPS100 Printer User Manual


 
3-1
3: Getting Started
It is important to consider the following points before logging into and configuring the
MPS:
You must configure the MPS IP address before any TCP/IP functionality is
available. (See Setting the IP Address on page 4-1) You cannot use the ThinWeb
Manager until you have configured an IP address.
Changing any server, service, or port setting requires privileged user status. The
default privileged password is system.
The login password is required for remote console logins. The default login pass-
word is access.
Note: If you would like to change either the privileged or login password,
either use EZWebCon or refer to the Print Server Reference Manual
located on the CD-ROM.
3.1 Configuration Methods
3.1.1 EZWebCon
The EZWebCon configuration software is the recommended way to configure the MPS.
EZWebCon’s graphical user interface guides first time users through the initial
configuration process and allows experienced users to update any configurable
parameters.
EZWebCon requires a Java Virtual Machine (JVM) on the client. Lantronix provides
JVM installers for Solaris and 32-bit Windows users, as well as source code and
instructions for compiling it for other systems.
The EZWebCon software is located on the distribution CD-ROM. All instructions for
installing EZWebCon are provided in the README file. For assistance once
EZWebCon is running, refer to the EZWebCon on-line help.
Note: EZWebCon is also available from the Lantronix website and FTP
server. See Appendix D for more information.
3.1.2 Incoming Logins
You can log in via EZWebCon to configure the MPS. you can also use incoming LAT
and TCP/IP logins.