Filter
Top Products
Server Commands Frequently-used Commands
F-2
F.2 Server Commands
Table F-1: Frequently-used Server Commands
Command Option(s) Description
CONNECT option servicename Makes a connection to a LAT service.
LOCAL num Makes a connection to the specified local port.
RLOGIN host Makes an Rlogin connection to the specified
host (text name or numeric IP address).
TCP host Makes a raw TCP connection to the specified
host (text name or numeric IP address).
TELNET host Makes a Telnet connection to the specified host
(text name or numeric IP address).
DEFINE SERVER BOOTP {EN/DIS} Enables or disables querying for a BOOTP host
at system boot time.
DEFINE SERVER DHCP {EN/DIS} Enables or disables querying for a DHCP host at
system boot time.
DEFINE SERVER GATEWAY ipaddr Specifies the host to be used as a TCP/IP gate-
way to forward packets between networks.
Enter an IP address.
DEFINE SERVER
INCOMING option
BOTH Enables incoming LAT and Telnet connections.
LAT Enables only incoming LAT connections.
NONE Disables incoming connections.
TELNET Enables only incoming Telnet connections.
PASSWORD Causes the MPS to prompt for a password for
all incoming connections.
NOPASSWORD Allows connections to be established without
prompting for a password.
DEFINE SERVER IPADDRESS ipaddr Sets the MPS’s network IP address.
DEFINE SERVER LOADHOST ipaddr Specifies the TCP/IP host from which the MPS
requests its run-time code.
DEFINE SERVER LOGIN PASSWORD Sets a new password that will be required before
incoming logins are accepted. You will be
prompted for the new password (up to 6 alpha-
numeric characters, case-insensitive).
DEFINE SERVER NAME “newname” Specifies a new name for the MPS. Names are
restricted in length; generally a name of 11 or
fewer characters is permissible.